If you are experiencing issues with your Keurig Duo Plus and need to take it apart, look no further!
In this step-by-step guide, I will walk you through how to disassemble your machine so you can troubleshoot the issue and get it back up and running.
From unplugging the machine to removing the water reservoir, K-Cup holder, drip tray, control panel, drip tray cover, pump cover, and water line – I’ve got you covered.
I will also provide tips on how to disassemble a Keurig in general in case you ever need to do it again. So don’t toss out that Keurig just yet! Follow our guide and let’s get started.
TLDR
Don’t like reading? Here’s a summary of the guide on how to take apart a Keurig Duo Plus:
- Unplug the machine and remove water reservoir first. Press release button to detach.
- Gently pull out the K-cup holder. Use a paperclip to clear grounds if needed.
- Remove drip tray. Lift cover off.
- Take out control panel screws with Phillips screwdriver. Disconnect cables.
- Flip up drip tray, pull off cover carefully.
- Unscrew pump cover with Phillips screwdriver. Inspect inside.
- Pull out water line gently when other parts removed. Check for clogs.
- Use Phillips and flat head screwdrivers, needle nose pliers, tweezers.
- Keep small parts organized in labeled bags.
- Consult manual if needed. Reassemble in reverse order.
- Take apart to deep clean inside components and residue buildup.
- Contact Keurig if malfunctioning and troubleshooting doesn’t fix issue.
Now let’s read on to the main article…
How to Take Apart Keurig Duo Plus?
Here is a step-by-step guide on how to take apart a Keurig Duo Plus coffee maker:
Step 1: Unplug the Machine
The first and most crucial step in disassembling your Keurig K Duo Plus is to ensure safety by unplugging the coffee machine from the wall socket. This prevents the risk of electrical shock.
Handle the power cord with care, using two hands and keeping it away from water and wet objects to avoid damage during the process. Once the power cord is safely disconnected, you can proceed to take apart the machine by pressing the auto button.
Step 2: Remove the Water Reservoir
After unplugging the machine, the next step is to remove the water reservoir by pressing the release button on the side. Use the H/M buttons to set the clock, then press the blinking BREW button to confirm the time. Slide the handle on the back from left to right to detach it from the base.
Lift the reservoir straight up to avoid any water leakage or spillage, ensuring careful handling of this component. Don’t forget to turn off the machine by pressing the power button before removing the water reservoir with a carafe button and a damp cloth and letting it warm to room temperature for at least 2 hours before use.
A clock icon will appear on the screen to indicate that the time has been set for auto-brew setup. Press the AUTO button to activate the auto brew setup and follow the instructions on the screen to complete the process.
Step 3: Remove the K-Cup Holder and Drip Tray
Following the machine’s disconnection, proceed by gently pulling the K-Cup holder away from the machine. Avoid sudden movements or jerking to prevent damage. If the drip tray is difficult to remove, consider using a flathead screwdriver to assist in prying it off. Keeping the machine intact is crucial during this step.
To make it easier to remove the K-Cup holder, you can also insert a paper clip into the entrance needle to loosen any coffee grounds that may be blocking it.
Once the K-Cup holder is removed, you can also take off the drip tray and place your coffee mug or travel mug on the drip tray base for easier brewing with a desired brew size using the single-serve option. Don’t forget to press the STRONG button for a bolder cup of bolder coffee before pressing the brew button.
Step 4: Remove the Control Panel
Unplug the machine and then lift the drip tray cover. To remove the control panel, remove the screws holding it in place (a Phillips-head screwdriver may be needed). After removing the control panel, disconnect the cables and wiring harness. Keep all removed parts and screws in a secure location for later reassembly.
Step 5: Remove the Drip Tray Cover
Before attempting to remove the drip tray cover, make sure the machine is unplugged. Start by flipping up the lower portion of the drip tray and gently pull it away. Use caution to avoid damaging the machine during this step, as pulling too hard can lead to unintended harm.
Step 6: Remove the Pump Cover
Prior to removing the pump cover, ensure the Keurig Duo Plus is unplugged, and all parts are secure. Use a Phillips head screwdriver to remove the screws holding the pump cover in place. Carefully lift the pump cover off the machine, possibly needing to wiggle it a bit for easy removal.
Inspect the inside of the pump cover for any signs of wear or damage, including any clogs from old Keurig pods or hot cocoa, to ensure a perfect cup of coffee and store all parts and screws safely for reassembly.
Step 7: Take Out the Water Line
Before pulling out the water line, make sure the coffee maker is unplugged and both the water reservoir and K-cup holder have been removed. Gently grip the end of the water line and pull it out, ensuring it remains straight to avoid stretching or tearing.
If it doesn’t come out easily, check for clogs and use a small tool to unclog it. Keep the water line and all other parts well-organized for successful reassembly. Remember to fill the reservoir with fresh water up to the MAX fill line before replacing it and adding the desired amount of ground coffee.
Can you take apart your Keurig to clean it?
Yes, you can take apart your Keurig coffee maker for a deep cleaning. Start by unplugging the machine and emptying the water reservoir. Remove the water reservoir, K-cup holder, and pod holder, and then carefully use a screwdriver to take off the outer housing like the control panel, drip tray cover, and pump cover.
This will reveal the internal components, including any coffee grounds that may be stuck inside the single cup. Clean them with hot water, mild soap, and brushes to get rid of coffee residue or mineral buildup.
Ensure all parts are completely dry before putting them back together. When reassembling, follow the reverse order, and refer to the instruction manual if needed. Be gentle and don’t force anything. Finally, run a few cleaning brews with filtered clean water soapy water, and descaling solution before using your Keurig again.
This regular cleaning with filtered water and descaling solution, as well as checking the mineral content of your water and cleaning the water tank and internal parts, including the filter cartridge and heating element, as outlined in the user manual, keeps your machine in good shape.
If you encounter any issues, such as your Keurig not heating water, you may need to contact Keurig customer service for further assistance.
What tools do I need to disassemble a Keurig K-Duo & K-Duo Plus?
Here are the basic tools you’ll need to fully disassemble a Keurig Duo Plus:
- Phillips head screwdriver – This is essential for removing the outer screws holding components like the control panel and internal covers in place. Have a medium-sized Phillips head screwdriver on hand.
- Needle nose pliers – Helpful for pulling out hoses or removing clamps. The needle nose design lets you reach into tight spaces.
- Flat head screwdriver – Comes in handy for prying off plastic components or unscrewing anything that a Phillips head can’t handle. Opt for a medium flat head.
- Utility knife – Useful for cutting away the tape, plastic pieces, or anything obstructing the removal of parts. Just be careful when using wiring.
- Tweezers – Help grab and manipulate small parts like screws or latches during disassembly. Keep a pair with fine tips.
- Flashlight – Illuminates the interior so you can see all the components clearly as you take things apart.
- Resealable plastic bags – Keep all the small parts organized and separated for easier reassembly later. Label bags for each area.
Conclusion
To conclude, disassembling a Keurig Duo Plus or any Keurig machine requires careful steps and attention to detail. Always start by unplugging the machine and removing the water reservoir.
Follow the step-by-step instructions to remove the different components, such as the K-Cup holder, drip tray, control panel, and pump cover. Take out the water line and continue with the disassembly process. Remember to proceed with caution and make sure you actually need to take your Keurig apart before proceeding.
If you encounter any difficulties, it’s always best to consult a professional or refer to the manufacturer’s manual. With proper care and maintenance, you can ensure your Keurig machine continues to function optimally for a long time.