Best Large Cold Press Juicer: EanOruus E-18 Leads
Five large cold press juicers ranked by hopper size, chute width and motor design. The EanOruus E-18 leads, but the Nama J2 wins for hands-free batch juicing.
The best large cold press juicer is the EanOruus E-18, a 12.1 lb masticating machine that pairs a 100oz hopper with a 6.5-inch feed chute so a bag of apples goes in whole. If you would rather load a full recipe once and walk away, the hands-free Nama J2 wins on workflow instead, trading chute width for a self-feeding hopper and a 50 RPM auger. Both are extra-large for a reason, and this guide is about matching that reason to your kitchen.
Best large cold press juicer at a glance
| Pick | Hopper / feed | Weight | Price |
|---|---|---|---|
| Best overall EanOruus Juicer Machines |
100oz hopper 6.5 in chute |
12.1 lb | Check Price |
| Best premium Nama J2 Cold Press Juicer |
Self-feeding hopper 200W, 50 RPM |
12.1 lb | Check Price |
| Best warranty Ninja NeverClog JC151 |
24oz jug 150W motor |
7.93 lb | Check Price |
| Best upgrade Canoly C16 3-in-1 |
90oz hopper 6 in chute |
13.9 lb | Check Price |
| Best budget pick TUUMIIST 3-in-1 Juicer |
6.5 in chute 3L / touch control |
10 lb | Check Price |
How I narrowed the shortlist
I started with masticating juicers, because centrifugal machines heat the juice and defeat the point of a cold press. From there, I lined up the published capacities and chute widths side by side and cut anything that would not clearly earn the word "large." Two picks kept the shape of the roundup even though their capacity framing is different: the Ninja NeverClog is measured by its 24oz jug rather than a hopper number, and the Nama J2 uses a self-feeding hopper without an ounce figure.
The criteria that survived, in the order I weighted them:
- Batch capacity, either a stated hopper volume or a hands-free workflow that removes the need to feed pieces one at a time.
- Feed chute width, because a 6.5-inch chute swallows a whole apple and saves the prep step that turns "large" into "still slow."
- Motor design and stated noise, since a big cold press runs longer than a small one and lives on your countertop.
- Published warranty, which two of the five include in writing.
What I did not weigh: any figure that was not printed on the listing. The word "large" is not standardised in this category, so I let the machines' own specifications decide who counts.
1. EanOruus Juicer Machines — Best overall
The E-18 is the best large cold press juicer here because it pairs the widest published hopper with the widest published chute in a 12.1 lb body.

Best for: meal-preppers running back-to-back batches for a family Skip it if: you juice one glass at a time in a small kitchen
Two figures do the work here. The 100oz hopper is the largest stated capacity in the set, tied only by the TUUMIIST, and the 6.5-inch feed chute is joint-widest with the same machine. EanOruus says the auger is driven by a high-torque AC brushless motor and describes it as "whisper-quiet," which is a manufacturer claim rather than a measured figure. What is measurable is the footprint: 17.4 x 13.7 x 7.48 in, and 12.1 lb on the counter. The E-18 also carries a 1 Year Limited Warranty in writing, which two of the five here do not, and it sells faster than every other pick in this set. The trade-off is real, though. This is a tall, deep machine, and the 100oz hopper only earns its keep if you actually fill it. Juice one carrot at a time and the E-18 is bigger than you need.
Pros:
- Largest published hopper in the set at 100oz
- 6.5-inch chute swallows a whole apple
- 1 Year Limited Warranty in writing
- Sells fastest of the six picks here
- AC brushless motor for hard, fibrous produce
Cons:
- 17.4-inch length demands real counter depth
- 12.1 lb is heavy to lift out of a cupboard
- Quiet claim is not backed by a stated decibel figure
2. Nama J2 - Cold Press Juicer — Best premium
The J2 is the pick when you would rather load a recipe once and walk away than manage a chute.

Best for: hands-free batch juicing while you cook Skip it if: you want a wide feed chute and whole apples
Nama's angle is not capacity in ounces, it is capacity in attention. The self-feeding hopper accepts a whole recipe of cut produce in one go, then the 200W motor turns the auger at 50 RPM while you do something else. That 50 RPM figure is the slowest published speed in this set, and slow is what a cold press juicer is supposed to be: less heat, less foam, more of the juice you paid for. The J2 weighs 12.1 lb, the same as the EanOruus, and its 17.7 x 9 x 9.8 in dimensions make it narrower on the counter but nearly as tall. The catch is what Nama does not print: there is no stated hopper volume in ounces and no warranty length in the listing. You are paying the highest price position in this set for a workflow rather than a spec sheet, and that only pays back if you juice enough to notice.
Pros:
- Self-feeding hopper for hands-free batches
- 50 RPM auger is the slowest cold press speed here
- 9-inch width fits a narrower counter run
- Quick-release parts and a cleaning brush included
- 200W motor tuned for leafy greens
Cons:
- No warranty length stated on the listing
- Highest price position of the five picks
- No published hopper capacity in ounces
- No wide-chute claim, so prep is still required
3. Ninja NeverClog Cold Press Juicer — Best warranty
The JC151 is the lightest, most compact pick here and one of only two with a warranty in writing.

Best for: a first cold press juicer in a compact kitchen Skip it if: you plan to juice for four people in one session
Ninja is the outlier of the roundup, and that is why it earns a slot. At 7.93 lb, the JC151 is the lightest juicer here by more than four pounds, and its 15.9 x 12.1 x 7.15 in footprint is the only one Ninja specifically describes as fitting under a kitchen cabinet. The stated 150W motor is the smallest wattage number in the set, but a cold press is a low-and-slow appliance where wattage rarely tells the story. What matters more here is the 24oz jug and 36oz pulp bin: this is a single-glass or two-glass machine, not a family-batch machine. Ninja publishes a 1 Year Limited Warranty and a 2023 release date. Two interchangeable pulp filters give you a texture choice, and the reverse function is there to break jams before they become a stripped auger. The concession is capacity. The word "large" in this roundup is doing more work for the Ninja than for anyone else.
Pros:
- Lightest juicer in this set at 7.93 lb
- Fits under a standard kitchen cabinet
- 1 Year Limited Warranty in writing
- Two pulp filters for Less Pulp or Lots of Pulp
- Reverse function to clear jams
Cons:
- 24oz jug is small for family batches
- 150W is the lowest stated motor here
- No wide-chute claim, so more prep chopping
4. Canoly 3-in-1 Cold Press Juicer C16 — Best upgrade
The C16 is the quiet, heavyweight alternative when you want the EanOruus workflow with a decibel figure attached.

Best for: a quieter countertop with room for a heavier machine Skip it if: you need the largest possible hopper in this set
The C16 is the only pick that puts a decibel number on the listing: Canoly says the AC brushless motor runs at 35dB, which is a claim rather than an independent measurement but at least it is stated. The 90oz hopper is second in this set only to the 100oz on the EanOruus and TUUMIIST, and the 6-inch feed chute is half an inch narrower than the joint winners. Two strainers cover juice and sorbet, plus a nut-milk mode Canoly builds into the same body. At 13.9 lb, this is the heaviest pick in the roundup, and its 17.5-inch height matches the Nama J2 for the tallest here. Canoly publishes a 1 Year Limited Warranty. The trade you make against the E-18 is 10oz of hopper capacity and half an inch of chute width for a written noise figure and a slightly deeper feature list. Whether that is worth the higher price position depends on how noise-sensitive your kitchen actually is.
Pros:
- 35dB noise figure printed on the listing
- 90oz hopper is second-largest here
- Three modes: juice, sorbet, nut milk
- 1 Year Limited Warranty in writing
- AC brushless motor for hard produce
Cons:
- Heaviest juicer in the set at 13.9 lb
- 6-inch chute is narrower than the joint winners
- 17.5-inch height needs cabinet clearance
5. TUUMIIST 3-in-1 Cold Press Juicer Machine — Best budget pick
The TUUMIIST matches the top capacity numbers at the lowest price position, and asks you to accept a shorter listing in return.

Best for: trying whole-fruit cold pressing without a big outlay Skip it if: you want a published warranty in writing
On the numbers alone, the TUUMIIST is remarkable. It matches the EanOruus on the 6.5-inch chute, states a 3L hopper capacity, and adds a touchscreen and an auto-reverse function that Ninja also uses. TUUMIIST claims up to 95% juice yield and a motor under 60dB. Both are manufacturer figures. The body is 10 lb and 16 x 7.76 x 8.82 in, which is shorter in length than every pick above it and narrower than the C16 or the E-18. The reasons this is the budget pick rather than the winner are on the listing too. There is no warranty length printed, only one seller lists it, and it sells more slowly than the EanOruus or the Ninja. If a written warranty matters to you, the JC151 and the E-18 both include one and the TUUMIIST does not. Read it as a way to enter the category at the entry price band with matching top-line numbers, not as a like-for-like swap.
Pros:
- Cheapest of the five picks
- 6.5-inch chute matches the winner
- Touchscreen control and auto-reverse
- 10 lb body is lighter than the winner
- 95% yield claim from the manufacturer
Cons:
- No warranty length stated on the listing
- Only one seller currently lists it
- Sells more slowly than the winner
- 60dB noise claim is a ceiling, not a measurement
What actually decides a large cold press juicer?
Most guides in this category compare wattage. That is not what decides it. A cold press is a slow appliance by design, and higher wattage does not automatically translate into more juice, less foam or a longer life. The Nama J2 runs on a 200W motor at 50 RPM and is the highest-priced pick here.
What actually decides a large cold press juicer is the interaction between three things:
- Hopper capacity, because that is what turns "juicing" into a session rather than an errand you repeat every glass.
- Feed chute width, because a hopper that holds 100oz still fails if you had to quarter every apple to fill it.
- Auger speed and motor type, because a lower-RPM auger extracts more from leafy greens and produces less heat, and an AC brushless motor holds its torque under load better than a small brushed one.
Line those three up and the EanOruus E-18 wins on two of them and ties on the third. The Nama J2 wins on workflow, which is a fourth axis the specs do not always show. Everything else in this roundup is a trade against those four.
Hopper size versus chute width: which matters more?
If you can only optimise one, optimise chute width. A big hopper with a small chute means you spend the saved batching time back on prep. A wide chute with a smaller hopper means you top up more often but each top-up is faster. In this set:
- 6.5-inch chute: EanOruus E-18, TUUMIIST.
- 6-inch chute: Canoly C16.
- Not stated as a wide-chute design: Ninja JC151, Nama J2.
The Nama J2 sidesteps the argument by loading a whole recipe of pre-cut produce and running unattended. That is a different answer to the same question. If you resent the chopping step, the J2's hopper is the fix. If you resent the topping-up step, the E-18 or the TUUMIIST is the fix.
What the listings do not tell you about cleaning
Every product page in this set promises "easy cleaning." None of them define it in a way you can compare. What the listings do not tell you is that cleaning time on a cold press juicer scales with two things: how many parts come apart, and whether the strainer has fine mesh or a plastic screen. A three-part quick-release design like the TUUMIIST's rinses faster than a five-part strainer stack. A fine mesh screen holds pulp in ways a plastic slot does not, so a cleaning brush stops being optional. Nama includes a brush in the box. EanOruus and Canoly describe detachable parts without a full count.
A practical rule: rinse the strainer under running water within a minute of finishing the last glass. Dried pulp is the difference between a two-minute rinse and a ten-minute soak, and no juicer in this set changes that physics.
EanOruus E-18 vs Nama J2: which suits you?
These are the two 12.1 lb machines and they answer different questions.
Pick the EanOruus E-18 if:
- You want the widest chute so whole apples and oranges skip the chopping board.
- You want a written warranty on the listing.
- You want the mid-price position rather than the highest here.
- You do a big weekly batch and refill the hopper as you go.
Pick the Nama J2 if:
- You want to load a full recipe and leave the kitchen.
- You want the slowest published auger speed, at 50 RPM, for leafy greens.
- You are happy to chop produce in advance to feed a self-feeding hopper.
- Countertop width matters more than countertop depth.
The cutoff is workflow. The E-18 makes the juicing session faster. The J2 makes the juicing session hands-off. Neither is universally better and the price positions reflect that: the E-18 sits mid, the J2 sits at the top of this set.
Who should skip a large cold press juicer entirely?
Not everyone should buy one of these. Skip a large cold press if:
- You juice a single glass in the morning and nothing else. The Ninja JC151 is the smallest here and even it is designed around a 24oz jug, not a shot glass.
- Your kitchen counter has less than 18 inches of usable depth. Four of the five picks are over 15 inches long, and the E-18 is 17.4 in.
- You will not commit to rinsing the strainer immediately after each session. Dried pulp on a fine mesh is the number one reason cold press juicers end up in a cupboard.
- You want hot soup or nut butter, not juice. A masticating juicer is the wrong tool.
None of that is a criticism of the category. It is a filter that saves you the wrong purchase.
The verdict
The best large cold press juicer is the EanOruus E-18. It combines the largest stated hopper in this set at 100oz with a joint-widest 6.5-inch chute, an AC brushless motor for tough produce, and a 1 Year Limited Warranty in writing. It sells faster than every other pick here and sits at the mid price position, not the top. For a family or a serious meal-prepper, that is the right default.
The runner-up is the Nama J2, and the condition that flips the recommendation is workflow. If you would rather load a recipe once and walk away than manage a wide chute, the J2's self-feeding hopper and 50 RPM auger are worth its higher price position. If your counter is narrow, the J2's 9-inch width is also easier to place than the E-18's 13.7 in.
The Ninja JC151 is the sensible entry point if the word "large" in your kitchen means "bigger than a citrus press, not a family machine." The Canoly C16 upgrades noise with its stated 35dB motor. The TUUMIIST matches the top specs at the entry price if a written warranty is not your dealbreaker.
FAQ
What size counts as a large cold press juicer?
What size counts as a large cold press juicer is not standardised on Amazon, which is why the modifier only partly filters the results. In this set, "large" tracks with a hopper of 90oz or more and a feed chute of 6 inches or wider. The EanOruus and TUUMIIST hit both. The Nama J2 hits neither on paper but replaces them with a self-feeding hands-free workflow.
Is a large cold press juicer worth it over a small one?
A large cold press juicer is worth it if you actually batch. A 100oz hopper only earns its keep when you fill it, and a 6.5-inch chute only saves time if you feed whole produce. If you make one 24oz glass a day and nothing else, the Ninja JC151 covers you at 7.93 lb. If you make a jug for the family or a two-day supply, the EanOruus E-18 pays back the counter space.
Does a wider feed chute damage the juice?
Does a wider feed chute damage the juice? No, not in a masticating design. A wider chute changes what you put in, not how the auger crushes it. The 6.5-inch chute on the EanOruus and TUUMIIST lets whole apples enter, then the low-speed auger presses them at the same rate it would press quarters. Feed chute width mostly saves you prep time and reduces oxidation from pre-cutting.
EanOruus E-18 or Nama J2 for leafy greens?
EanOruus E-18 or Nama J2 for leafy greens is a workflow question, not a yield one. The Nama J2's 200W motor at 50 RPM is the slowest published auger speed in this set, and slower usually means better extraction from kale and spinach. The E-18 offsets that with the 6.5-inch chute for whole leaves. Choose the J2 if greens are the main event, the E-18 if they share the hopper with hard produce.
What is the biggest mistake first-time buyers make?
The biggest mistake first-time buyers make is optimising for wattage. Cold press juicers are slow by design and a bigger motor number does not mean more juice. The three specs that actually decide the purchase are hopper capacity, chute width and auger speed. Read the listing for those three, then read the warranty. Two picks here publish one, three do not.
If you have room on the counter and a family to feed, the EanOruus E-18 is the pick to load first. Order the strainer basket into the sink the moment your last glass is poured, keep an apple wedge in the chute to push the last of the greens through, and you will make more juice in the first month than most people make in a year with a smaller machine. If the walk-away workflow of the Nama J2 sounds more like your kitchen, that is the sign to pay the premium. Match the machine to the session you actually run and neither of these juicers ends up in the cupboard.
Last updated: September 11, 2026. Product availability re-checked.
This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.